IEEE Transactions on Industrial Electronics · 2020 · 69 citations · 28 references
EngineeringAerospace EngineeringElectrical EngineeringAerospace StructuresAircraft DesignPower ElectronicsAircraft Electrical SystemsConverter TopologiesDc-dc ConversionDc-dc ConvertersBidirectional Dc-dc ConvertersBuck ConvertersBuck-boost ConvertersDc-dc Converter TopologiesDual Active Bridge ConvertersDuty Cycle ControlInterleaved ConvertersInterleaved Dc-dc Converter
Although conventional dual-active-bridge (DAB) dc–dc converters have been applied in more-electric aircraft, the maximum transmission power of conventional DAB converters is still limited by its structure. In order to increase the maximum transmission power, this article proposes a novel interleaved parallel bidirectional DAB converter. Two bidirectional buck/boost converters are applied in low-voltage side of the proposed converter. So the voltage of transformer primary side would not be limited by the voltage of low-voltage bus and can be controlled by the duty cycle according to the modulation strategies. In this article, three phase-shift control methods are used for the proposed topology. From the analysis of operation modes and power characteristics of the proposed topology, compared with the single phase-shift (SPS), the extended phase shift can reduce the reactive power and current stress. The pulsewidth modulation (PWM) plus single phase-shift (PWMSPS) can achieve more than twice of the maximum transmission power of conventional DAB converter. Finally, test results verify the theoretical analysis and the validity of the proposed converter.
28