Development and Characterization of Clay–Nanocomposites for Water Purification

Abstract

In this work we propose a facile method of preparing cost-effective clay-metaloxide/metal (CuO/Ag and ZnO/Ag) composite pellets for an efficient water purification technique. Clay, with intrinsic antibacterial activity, served as a membrane support for different metaloxide/Ag nanoparticles (NPs) concentrations (2.5, 5 and 10 wt.%), as the active fillers. The effect of time (24 and 48 h) on the bactericidal activity of these pellets was also monitored. The clay-nanocomposite pellets were characterized using: X-ray diffraction, X-ray fluorescence, scanning electron microscopy, transmission electron microscopy, ultraviolet-visible (UV-Vis) spectrophotometry and nitrogen desorption analysis. The antibacterial activity performance was tested using <i>E. coli</i> and <i>S. aureus</i> strains of ATCC25922 and ATCC25923, respectively, in two aqueous media (nutrient broth and nutrient-free) by the colony-forming unit method. The results showed that the clay-CuO/Ag composite with a bandgap (1.24 eV) exhibited overall best performance under all conditions and time factors of ~100% efficiency in nutrient-free medium for all concentrations and times and 20-40% efficiency in nutrient broth for 24 h. The clay-ZnO/Ag with a bandgap of 2.88 eV showed no bactericidal activity in both media, except for that with 10 wt.% ZnO/Ag which showed 100% efficiency in nutrient-free medium after 24 h. All the synthesized composites showed 100% bactericidal efficiency in nutrient free medium after 48 h. These results indicate that, the clay/metaloxide/Ag could serve as efficient water purification technique, with a potential for large-scale commercialization.