Procedia CIRP · 2020 · 14 citations · 6 references
EngineeringComputational EngineeringManufacturing EngineeringAdditive ManufacturingComputational Materials ScienceMechanical Behavior Of Materials3D PrintingDesign For Additive ManufacturingManufacturing SimulationMesh ModelingMetal Additive ManufacturingResidual StressAdditive Manufacturing Of Metal StructuresAdditive Manufacturing Residual StressDisplacementManufacturing System SimulationResidual Stress SimulationResidual Stress TougheningTetrahedral ElementsTetrahedral Meshing
In additive manufacturing simulation most of the time the overall aim is to compensate residual stress induced deformations of a printed part. For this goal a high result accuracy is needed. In order to achieve this, simulation engineers have to take numerous decisions. This article provides assistance in the determination of a reasonable meshing type using a complex to mesh test sample that is close to the real geometry of round metallic fatigue test samples. The traditional Cartesian meshing strategy with and without the use of a projection factor is compared with layered tetrahedral meshing, which is newly introduced to additive manufacturing simulation. Additionally the displacement results are set side by side with a scan of an additive manufactured part. The study shows that layered tetrahedral meshing can achieve more accurate results with coarser mesh sizes, especially in regions of high curvature.
6
Stefan Leuders, M. Thöne, Andre Riemer et al. · International Journal of Fatigue · 2012 · 1.4K citations
Natural Sciences, Materials Engineering, Materials Science +17