Lightning impulse breakdown characteristics of SF<sub>6</sub> and 20% C<sub>3</sub>F<sub>7</sub>CN / 80% CO<sub>2</sub> mixture under weakly non-uniform electric fields

L. Loizou, L. Chen, Qiang Liu, Mark Waldron

IEEE Transactions on Dielectrics and Electrical Insulation · 2020 · 17 citations · 11 references

DOIFull text

Open access

Concepts

Abstract

This paper provides a comparative study on the impulse breakdown performance of SF <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">6</inf> and 20% C <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</inf> F <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">7</inf> CN / 80% CO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</inf> gas mixture under weak non-uniform electric fields. Two geometrically distinct electrode configurations, with similar field utilization factor, were subjected to standard lightning impulse waveform (1.2/50 μs) and the effects of pressure, gap distance and impulse polarity on breakdown characteristics were studied. The results show that SF <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">6</inf> has a higher breakdown voltage than the C <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</inf> F <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">7</inf> CN/CO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</inf> mixture and the positive 1.2/50 μs breakdown voltages were found to be higher than the negative counterparts. These results show that the effect of polarity on breakdown voltage does not exclusively depend on electrode geometry but also on pressure and gas type. The results of this paper identify the weaker polarity for 20% C3F7CN / 80% CO2 tested with hemispherical rod-plane and coaxial electrode configurations and the results contribute to the design of SF <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">6</inf> -free gas insulated equipment.

References

11