Energy & Fuels · 2020 · 63 citations · 39 references
Natural SciencesChemical EngineeringChemistryCatalysisIndustrial ChemistryReaction EngineeringBiomass ConversionCatalyst CharacterizationCatalyst DesignCatalytic MechanismsCatalytic Reaction EngineeringIndustrial Catalytic ProcessesBiomass CharacterizationBiomass Conversion CatalysisCatalytic Biomass ConversionDepolymerizationLignin ChemistryLignin-derived CompoundsLignocellulosic Biomass ConversionRenewable Feedstock Conversion
Direct hydrogenolysis of native lignin in biomass into monomeric phenols has received increasing attention. In this work, catalytic transfer hydrogenolysis of native lignin from birch, pine, and corn stalk was studied over a Ni–Pd bimetallic catalyst using isopropanol as the in situ hydrogen source. The bimetallic Ni50Pd50/SBA-15 exhibited higher activity than the monometallic counterparts in catalytic transfer hydrogenolysis of native birch lignin, affording 37.2 wt % monophenols at 245 °C after 4 h. 4-Propylsyringol had the highest yield of 18.9 wt % with a selectivity of 51%. Among the three biomass feedstocks, native lignin in birch gave the highest monophenol yield, which is 2.2 times that of native pine lignin (16.9 wt %) and 4.6 times that of native corn stalk lignin (8.1 wt %). FTIR and Py–GC MS analyses of the starting biomasses and the depolymerization solid products revealed that native birch lignin has the highest depolymerization efficiency with the least active lignin remaining.
39
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Haiping Yang, Rong Yan, Hanping Chen et al. · Fuel · 2007 · 7.8K citations
Formic-acid-induced depolymerization of oxidized lignin to aromatics
Alireza Rahimi, Arne Ulbrich, Joshua J. Coon et al. · Nature · 2014 · 1.2K citations
A sustainable wood biorefinery for low–carbon footprint chemicals production
Yuhe Liao, S.-F. Koelewijn, Gil Van den Bossche et al. · Science · 2020 · 1.1K citations · Full text