Geophysical Prospecting · 2020 · 23 citations · 16 references
EngineeringCivil EngineeringEarth SciencesExploration GeophysicsSeismologyTunnel EngineeringTunnel GeometryTunnel LightingSeismic Source Design
ABSTRACT Tunnel seismic prediction is widely used in the field of tunnel seismic advance detection. The illumination of the target and the signal‐to‐noise ratio of the data are two key factors affecting the precision of data interpretation. Current seismic prospecting has shortcomings on sites: (1) The lighting shots are solely towards one side of the tunnel wall, (2) the geophones are placed far away from the tunnel face and (3) the surface waves from the tunnel wall dominate over the reflection waves, lowering the signal‐to‐noise ratio of the data at the tunnel wall. This paper proposes a tunnel symmetrical geometry to tackle the above challenges. The arrangement is to place 12 sources uniformly on each side of the tunnel wall and six geophones on the tunnel wall and face. Results of simulated data and measured data show that the proposed method enables (1) broad illumination of the target body, (2) the enhancement of illumination energy of the target body, and (3) higher data signal‐to‐noise ratio. The proposed symmetrical geometry method provides better interpretation in terms of broader coverage, higher quality and greater distance of investigation.
16
An overview of ahead geological prospecting in tunneling
Shucai Li, Bin Liu, Xinji Xu et al. · Tunnelling and Underground Space Technology · 2017 · 460 citations
Wave-equation-based seismic illumination analysis
Xiao‐Bi Xie, Shengwen Jin, Ru‐Shan Wu · Geophysics · 2006 · 147 citations