Fast Charge Transfer across the Li₇La₃Zr₂O₁₂ Solid Electrolyte/LiCoO₂ Cathode Interface Enabled by an Interphase-Engineered All-Thin-Film Architecture

Abstract

Lithium garnet Li₇La₃Zr₂O₁₂ (LLZO) is being investigated as a potential solid electrolyte for next-generation solid-state batteries owing to its high ionic conductivity and electrochemical stability against metallic lithium and high potential cathodes. While the LLZO/Li metal anode interface has been thoroughly investigated to achieve almost negligible interface resistances, the LLZO/cathode interface still suffers from high interfacial resistances mainly due to the high-temperature sintering required for proper ceramic bonding. In this work, the LLZO solid electrolyte/LiCoO₂ (LCO) cathode interface is investigated in an all-thin-film model system. This architecture provides an easy access to the interface for in situ and ex situ characterization, allowing one to identify the degradation processes taking place under high-temperature cosintering and to test solutions such as interface modifications. Introducing an in situ-lithiated Nb₂O₅ diffusion barrier at the interface, we were able to lower the LLZO/LCO charge transfer resistance to about 50 Ω cm², a 3-fold reduction with respect to previously reported values. The low interfacial resistance combined with the high conductance through the LLZO thin-film electrolyte allows one to investigate the charge transfer at high charge-discharge rates, unlike in bulk systems. At 1C, discharge capacities of about 140 mA h g^-1 were measured, and at 10C, 60% of the theoretical capacity was retained with a cycle life over 100 cycles. Besides the role of this architecture in the interface investigation, this work also constitutes a milestone in the development of thin-film solid-state batteries with higher power densities.