2019 · 27 citations · 20 references
EngineeringMaterials EngineeringMining EngineeringAdditive ManufacturingMine AutomationStructural Materials3D PrintingRapid PrototypingStrain MeasurementStrain SensorsStructural Health MonitoringEmbedded Strain SensorsPolylactic Acid MaterialsPrinted SensorsPrinted Strain SensorsStrain Gauge MeasurementStrain Gauge SensorsStrain Sensor HysteresisThree-dimensional Printing
Additive manufacturing, or 3D printing, is evolving from a technology that can only aid rapid prototyping, to one that can be used to directly manufacture large-scale, real-world equipment. Gravity Separation Spirals (GSS) are vital to the mining industry for separating mineral-rich slurry into its different density components. In order to overcome inherent drawbacks of the traditional mould base manufacturing methods, including significant tooling costs, limited customisation and worker exposure to hazardous materials, a 3D printer is under development to directly print spirals. By embedding small Internet of Things (IoT) sensors inside the GSS, it is possible to remotely determine the operation conditions, predict faults, and use collected data to optimise production output. This work presents a 3D printed strain sensor, which can be directly printed into the GSS. This approach uses a carbon-based conductive filament to print a strain gauge on top of a Polylactic Acid (PLA) base material. Printed sensors have been tested using an Instron E10000 testing machine with an optical extensometer to improve accuracy. Testing was conducted by both loading and unloading conditions to understand the effect of hysteresis. Test results show a near-linear relationship between strain and measured resistance, and show a 6.05% increase in resistance after the test, which indicates minor hysteresis. Moreover, the impact of viscoelastic behaviour is identified, where the resistance response lags the strain. Results from both conductive and non-conductive material show the impact of the conductive carbon upon the tensile strength, which will help to inform future decisions about sensor placement.
20
A stretchable carbon nanotube strain sensor for human-motion detection
Takeo Yamada, Yuhei Hayamizu, Yuki Yamamoto et al. · Nature Nanotechnology · 2011 · 3.2K citations
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Joseph T. Muth, Daniel M. Vogt, Ryan L. Truby et al. · Advanced Materials · 2014 · 1.6K citations · Full text
Sensor for Measuring Strain in Textile
Corinne Mattmann, Frank Clemens, Gerhard Tröster · Sensors · 2008 · 460 citations · Full text