A Comparison of the Performance of Different Morphologies of LiNi_0.8Mn_0.1Co_0.1O₂ Using Isothermal Microcalorimetry, Ultra-High Precision Coulometry, and Long-Term Cycling

Abstract

Ni-rich positive electrode materials for Li-ion batteries have the dual benefit of achieving high energy density while reducing the amount of Co used in cells. However, limitations in cycle life are still an issue for the widespread adoption of these materials. The benefit of using single crystal materials has been demonstrated for LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532), LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622), and now LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811). This work uses long-term cycling, ultra-high precision coulometry (UHPC), and isothermal microcalorimetry to investigate the effect of particle morphology on the lifetime of NMC811/graphite pouch cells. NMC811 with uncoated single crystal (SC) particles, coated polycrystalline (PC) particles, and a composite “bimodal” (BM) material are studied with electrolyte systems that have shown excellent cycle life in other NMC materials. Results from this work show that SC cells have improved cycle life in long-term cycling, as well as higher coulombic efficiency (CE) and lower charge endpoint capacity slippage as seen in the UHPC measurements. This correlates well with the isothermal microcalorimetry results, in which SC cells show the lowest parasitic heat flow over a range of upper-cutoff voltages. This study suggests excellent lifetimes can be achieved in single crystal NMC811/graphite cells with further electrolyte optimization.