Microstructure and properties of n-type Bi<sub>2</sub>Te<sub>3</sub>-based thermoelectric material fabricated by selective laser sintering

Xinhong Xiong, Long Zhu, Guoxian Wang, Danhui Liu, Qiaoxin Zhang, Wei Feng

Materials Research Express · 2020 · 10 citations · 19 references

DOIFull text

Open access

Concepts

Abstract

An n-type Bi 2 Te 3 -based thermoelectric material Bi 2 Te 2.85 Se 0.15 was prepared through an SLS (Selective Laser Sintering) process with E12/Bi 2 Te 2.85 Se 0.15 as composite powder (weight ratio 1:7), from which E12 was degreased after the SLS process. It was studied the effect of laser power, scanning speed and scanning interval on the density and thermoelectric properties of the sintered samples. The laser power was found the most important influential factor, while the scanning interval was the second and the scanning speed the least. The maximum dimensionless thermoelectric figure of merit ZT is about 0.88 in the condition when the laser power, scanning interval and scanning speed were 20 W, 0.26 mm and 3000 mm s −1 , respectively.

References

19