Parametric optimization of engine performance and emission for various n-butanol blends at different operating parameter condition

Amit R. Patil, Avinash D. Desai

Alexandria Engineering Journal · 2020 · 17 citations · 25 references

DOIFull text

Open access

Concepts

Abstract

In present work, study of effect of different n-butanol diesel blends (5–20% v/v) on engine performance and emission were performed for different engine operating parameter. Optimization was carried out with help of Taguchi DoE method. Single Cylinder VCR Compression Ignition Engine was fuelled with different blend of diesel and n-butanol and tested at different engine settings of CR, FIP and FIT for different load conditions (Idle, 1/3, 2/3 and full load). Normality analysis was performed to check the distribution of response data and then regression analysis was performed to derive the mathematical model for the chosen responses (BSFC, BTE, NOx and Smoke) based on n-butanol and engine parameters. During the optimization analysis, it is found that n-butanol of 15% concentration in diesel with engine settings, CR of 15, FIP of 260 bar and FIT of 25°bTDC give optimize BTE, BSFC and low smoke but resulted in higher NOx formation due to tradeoff between NOx and smoke control. The use of 15%v/v of n-butanol was found to be most suitable blend proportion with diesel as it resulted in favorable engine performance and low emission for all test load conditions. Also during this study, it was observed that Taguchi method is highly effective when individual response parameter need to be optimized for different engine responses and to identify the significant factor from multiple design factors. But for optimization of multiple design factors for most favorable responses simultaneously, use of advanced optimization methods from MADM (Multi Attribute Decision Making) approach to be implemented.

References

25