Publication | Open Access
The Improvement of Pollutant Removal in the Ferric-Carbon Micro-Electrolysis Constructed Wetland by Partial Aeration
24
Citations
22
References
2020
Year
EngineeringBioelectrochemical ReactorBiological Waste TreatmentSubsurface FlowWastewater TreatmentPollutant RemovalChemical EngineeringTotal NitrogenBioremediationWater TreatmentEnvironmental MicrobiologyPartial AerationWastewater ManagementIndustrial WastewaterWaste ManagementConstructed WetlandEffluent DisposalEnvironmental EngineeringEnvironmental RemediationWater Purification
Subsurface flow constructed wetland (SSFCW) has been applied for wastewater treatment for several decades. In recent years, the combination of ferric-carbon micro-electrolysis (Fe/C-M/E) and SSFCW was proven to be an effective method of multifarious sewage treatment. However, Ferric substrate created a relatively reductive condition, decreased the oxidation efficiency of NH4+-N, and blocked the following denitrification process, which led to the low removal efficiencies of NH4+-N and total nitrogen (TN). In this study, partial aeration was introduced into the ferric-carbon micro-electrolysis SSFCW (Fe/C-M/E CW) system to solve the problem above. The water quality and nitrogen-related functional genes of bacteria on the surface of substrate were measured for mechanism exploration. The results showed that, the removal efficiencies of NH4+-N and total phosphorus (TP) in an aerated Fe/C-M/E CW system were 96.97% ± 6.06% and 84.62% ± 8.47%, much higher than 43.33% ± 11.27% and 60.16% ± 2.95% in the unaerated Fe/C-M/E CW systems. However, the TN removal in Fe/C-M/E CW system was not enhanced by aeration, which could be optimized by extending more anoxic section for denitrification.
| Year | Citations | |
|---|---|---|
Page 1
Page 1