Dental Materials Journal · 2020 · 18 citations · 34 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsDental MaterialsCeramic BiomaterialsDental CeramicsImplant MaterialsAluminaBiaxial Flexural StrengthFlexural StrengthHot Isostatic PressingImplant DegradationStatic StrengthStatic Strength TestingTemperature-dependent Degradation
The objective of this study was to investigate the low temperature degradation characteristics of 2 types of high strength yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) in order to evaluate its suitability for implant body, implant superstructure or abutment. Disk-shaped conventional Y-TZP (0.25 mass% alumina) subjected to hot isostatic press treatment (HIP-Y-TZP) and Y-TZP/4Al2O3 with additional alumina (4.0 mass%) were mirror-polished. Accelerated aging tests with 134°C for 5 h at 0.2 MPa and 180°C for 5 h at 1.0 MPa were performed using an autoclave. Biaxial flexural strength and crystal phases were evaluated. Strength decreased as the proportion of monoclinic phase increased after accelerated aging treatment for both types of high-strength Y-TZPs. Despite the low alumina content, HIP-Y-TZP showed higher static strength and strength after accelerated aging treatment compared to Y-TZP/4Al2O3. However, both types of Y-TZP had adequate strength to be used as dental restorations even after accelerated aging treatment, therefore, its clinical suitability was considered high.
34
Phase Analysis in Zirconia Systems
R. C. Garvie, Patrick S. Nicholson · Journal of the American Ceramic Society · 1972 · 1.4K citations
What future for zirconia as a biomaterial?
Jérôme Chevalier · Biomaterials · 2005 · 1.2K citations
Natural Sciences, Dental Biomaterials Science, Materials Science +10