IEEE Transactions on Industrial Electronics · 2020 · 135 citations · 37 references
EngineeringElectrical EngineeringCircuit TheoryPower ElectronicsRenewable Energy SystemsDc-dc ConversionDc-dc ConvertersPower Electronics For Renewable EnergyRenewable Energy Power ConversionSolar Energy SystemsSolar Photovoltaic SystemsContinuous Conduction Mode OperationDiscontinuous Conduction Mode OperationParasitic ElementsPole-zero AnalysisPole-zero PlacementPower Conversion For Photovoltaic SystemsSmall-signal ModelingSwitched-capacitor Converters
A switched capacitor-inductor network (SCLN)-based ultra voltage gain dc-dc converter using a single switch is presented. The SCLN converter can achieve ultra dc voltage gain with minimum number of devices when compared with other existing converters. Moreover, the voltage gain is significantly improved at entire duty ratios. In addition, due to switched approach of inductor and capacitor, the converter provides lesser ripple content in the output voltage and current. The operation of the converter in continuous conduction mode (CCM) and discontinuous conduction mode (DCM) is discussed. The parasitic elements are considered to estimate the dc voltage gain and the efficiency of the converter more precisely. The small-signal model of the converter is derived, and the pole-zero locations are investigated. Moreover, the comparative performances of the SCLN converter with existing converters are reported. A hardware prototype has been developed and tested. To prove the applications of the SCLN converter in solar PV system, the experimental results are observed by considering the output voltages of 650 V for three-phase and 325 V for single-phase applications.
37
A DC–DC multilevel boost converter
Julio C. Rosas‐Caro, Fang Zheng Peng · IET Power Electronics · 2009 · 523 citations