Queensland's institutional digital repository (The University of Queensland) · 2019 · 11 citations · 0 references
EngineeringEarth SciencesPetroleum EngineeringReservoir CharacterizationReservoir EngineeringReservoir SimulationFracture CharacterizationFracture GeometryFracture MechanicsFracture PropagationReservoir GeomechanicsWell HydraulicsDynamic FractureFrac HitsFracture Geometry ModelingFracture Propagation ModelingFracture Propagation SimulationHydraulic Fracture PropagationHydraulic Fracture SimulationStress State Effects
During the progression from Hold By Production to infill drilling, operators usually encounter the frac hits and cause communication between parent and infill wells. Well communication is often detrimental to both parent and infill wells. However, the mechanisms of frac hits have not been thoroughly studied. Hence, to optimize parent-infill well development, we will study fracture propagation in infill wells and investigate frac hits between infill and parent wells. We have developed an efficient coupled fluid flow and geomechanics model to characterize stress change in reservoirs with complex fracture geometry. The reservoir geomechanics model will be used to characterize spatial and temporal evolution of stress state due to depletion of the parent well. Based on updated heterogeneous reservoir stress state, an in-house hydraulic fracture model is used to simulate dynamic fracture propagation in infill wells and investigate frac hits. The results indicate that an unfavorable fracture geometry is generated in infill wells. Pressure sink induced by depletion decreases the magnitude of reservoir principle stresses. Hence, fractures in the infill well tend to propagate toward the depleted region of the parent well and generate an unsymmetrical fracture geometry in the two sides of the infill well, resulting in fracture hits. Furthermore, pressure sink also changes the orientation of principle stresses, which induce fractures in the infill well changing propagation direction and hitting pre-existing fractures in the parent well. This paper will help understand mechanisms of parent well production loss and lower-than-expected production rate of infill wells. This work can also provide critical insights to mitigating frac hits for parent-infill well development and well spacing optimization.