Heterogeneity effects on mixed‐mode I/II stress intensity factors and fracture path of laboratory asphalt mixtures in the shape of SCB specimen

Abstract

Abstract Edge cracked semi‐circular shape specimen subjected to three point bend loading is a favourite test specimen for determining fracture toughness of asphalt mixtures. However, in the vast majority of previous experimental works, the homogeneous medium assumption has been considered for determining the stress intensity factor and geometry factors of asphalt mixtures tested with this test configuration. As a more realistic model and in order to consider the effects of heterogeneity on corresponding values of stress intensity factors, the asphalt mixture was modelled as a two‐phase aggregate/mastic heterogeneous mixture and its fracture behaviour was investigated using numerical models of asymmetric semi‐circular bend (ASCB) specimens. The generation and packing algorithm was employed to randomly distribute the aggregates with different shapes and sizes inside the mastic part. The effect of the mechanical properties of asphalt mixture (elastic modulus and the Poisson's ratios of aggregates and mastic), coarse aggregates distribution and crack length were studied on modes I and II geometry factors by means of extensive two‐dimensional finite element analyses. Moreover, the effect of the elastic modulus of asphalt mixture components was evaluated on the fracture path using the maximum tangential stress criterion. It was shown that crack tip location, elastic modulus of aggregates and mastic are the most important affecting parameters on the magnitude of modes I and II geometry factors. It was also shown that the geometry factors are not sensitive to the Poisson's ratios of aggregates and mastic. In addition, fracture cracking path is affected by the elastic modulus of the asphalt mixture components such that, depending on the difference between the stiffness of stiffer coarse aggregates and softer mastic part, the crack may propagate either through the aggregates, mastic or interface of aggregate/mastic.