2019 · 28 citations · 13 references
EngineeringElectrical EngineeringElectric MachinesFinite Element AnalysisFinite Element MethodsDrive SystemsElectric DrivesElectric Motor DrivesElectric MotorsElectric Traction MotorsInduction MachinesCo-simulationElectric Motor SimulationFinite Element Analysis Of MachinesModel Co-simulationMotor ModelingTractionTransient PerformanceTransient Performance Analysis
This paper presents the results obtained by the finite elements model co-simulation technique in the transient analysis of an electric drive for advanced traction applications. The case study refers to a 200kW induction motor drive designed for a premium electric vehicle in the frame of the Horizon 2020 “ReFreeDrive” project (Rare earth Free e-Drives featuring low cost manufacturing). The transient performance and the operating limits are evaluated when a field-oriented control strategy based on the lumped parameters model of the machine is used. The co-simulation involves the ANSYS/Simplorer and MATLAB/Simulink environments. The finite element motor model developed in ANSYS is controlled by the rotor flux-oriented controller with axes decoupling built in Simulink. A lumped parameters motor model is also derived to design the control parameters and implemented in Simulink for comparison respect to the co-simulation approach. The results highlight the influence of the controller detuning for the correct prediction of the voltage limit operation at steady state.
13
David G. Dorrell, Andrew M. Knight, Lyndon R Evans et al. · IEEE Transactions on Industrial Electronics · 2011 · 157 citations
Engineering, Automotive Engineering, Electrical Engineering +16