Scientific Reports · 2019 · 52 citations · 33 references
Natural SciencesMaterials EngineeringMaterials ScienceCorrosion ScienceMetallic MaterialsMetallurgyAlloysCorrosion EngineeringCorrosion MechanismsCorrosion-resistant MaterialsMetalsStainless SteelsCalphad ModelingCorrosion BehaviorCorrosion Of Ferrous AlloysCorrosion ProcessesDegradationHigh-entropy AlloysMolten Salt CorrosionThermal Stability
Abstract The corrosion behavior of the FCC Cr 18 Mn 27 Fe 27.5 Ni 27.5 high entropy alloy (HEA) after exposure to molten FLiBe salt at 700 °C for 1000 hours, has been investigated. Results show that the HEA lost a higher mass compared to the reference 316 H stainless steel due to the dissolution of Mn into the molten salt. The loss of Mn from the alloy appeared to discourage the dissolution of Cr in the molten fluoride salts which is widely recognized as the mechanism of corrosion degradation. Thermal exposure at 700 °C for 1000 hours also led to the precipitation of an additional BCC phase Cr 67 Fe 13 Mn 18.5 Ni 1.5 , which was confirmed by CALPHAD predictions.
33
Microstructures and properties of high-entropy alloys
Yong Zhang, Ting Ting Zuo, Zhi Tang et al. · Progress in Materials Science · 2013 · 7K citations
Natural Sciences, Materials Engineering, Materials Science +12