Biohybrid Hydrogel and Aerogel from Self-Assembled Nanocellulose and Nanochitin as a High-Efficiency Adsorbent for Water Purification

Abstract

A simple and novel method, self-assembly of nanocellulose and nanochitin, was developed to produce high-efficiency and versatile biohybrid hydrogel (BHH) and aerogel (BHA) for water purification. The self-assembly process was driven by the electrostatic force between one-dimensional (1D) negatively charged TEMPO-oxidized cellulose nanofiber (TOCNF) and positively charged partly deacetylated chitin nanofiber (PDChNF). The self-assembly process was performed at room temperature and without adding any cross-linking agents throughout the process. This results in the three-dimensional (3D) BHH that physically cross-linked via both electrostatic interactions and hydrogen bonding between TOCNF and PDChNF. The obtained BHA from lyophilized BHH exhibited a highly porous interconnected structure with a specific surface area of 54 m2·g–1, which assures the availability of its internal active site for the adsorption of toxic metalloid ions and organic pollutants. Consequently, the BHA displayed super-high adsorption capacities of 217 mg·g–1 for As(III) under the neutral pH conditions and 531 mg·g–1 for methylene blue (MB) under an alkaline aqueous condition with rapid adsorption kinetics, in sharp contrast to conventional biobased adsorbents. Moreover, the BHA is reusable, which still exhibited a high MB adsorption capacity of 505 mg·g–1 even after five successive adsorption–desorption cycles. This versatile BHA produced via a facile preparation strategy is proven to be a promising renewable adsorbent for water purification, offering simple and green alternatives to the conventional adsorbent from synthetic polymers.