Propulsion Performance of Cylindrical Rotating Detonation Engine

Ryuya Yokoo, Keisuké Goto, Juhoe Kim, Akira Kawasaki, Ken Matsuoka, Jiro Kasahara, Akiko Matsuo, Ikkoh Funaki

AIAA Journal · 2019 · 72 citations · 24 references

DOIFull text

Open access

Concepts

TL;DR

The study evaluates the propulsion performance of a nozzleless cylindrical rotating detonation engine, proposes its internal flow structure, and estimates thrust via pressure and momentum exchange. The RDE was tested in a low‑back‑pressure environment using a mixture at various propellant mass flow rates, and its internal flow structure and thrust were modeled and validated experimentally. High‑speed imaging revealed rotating luminous regions at high mass flow rates, pressure data showed sonic exhaust, and theoretical thrust matched load‑cell measurements, giving specific impulses 80–90% of ideal and suggesting a 20% performance gain with a divergent nozzle.

Abstract

This study evaluated the propulsion performance of a nozzleless, cylindrical rotating detonation engine (RDE). Using a mixture, the RDE was tested in a low-back-pressure environment at propellant mass flow rates of . In high-speed imaging of the self-luminescence within the combustor, rotating luminous regions were observed at mass flow rates above . Measured pressure distributions suggest that burned gas reached sonic velocity at the combustion chamber outlet. This paper proposes the structure of internal flow in the RDE and confirms that calculated pressure distribution based on the structure was close to the experimental distribution. This study also estimated the RDE's thrust by pressure and momentum exchange and confirmed it by experimental measurement. Moreover, the theoretical thrust calculated under the assumption that exhaust is a sonic flow agreed with the load cell thrusts, suggesting that RDE combustion is perfectly completed inside the chamber. Specific impulses are 80–90% of specific impulses for ideal correct expanded flow for all mass flow rates, and its value was close to that of an annular RDE. In addition, RDE performance will increase by about 20% if the RDE is equipped with a divergent nozzle and the gas is correctly expanded to back pressure.

References

24