Production of Biocomposites Using Different Pre-treated Cut Jute Fibre and Polylactic Acid Matrix and Their Properties

Heidy Burrola‐Núñez, P.J. Herrera‐Franco, Herlinda Soto‐Valdez, D.E. Rodríguez-Félix, R. Meléndrez, Tomás Jesús Madera-Santana

Journal of Natural Fibers · 2019 · 16 citations · 19 references

Concepts

TL;DR

Petroleum‑based plastics cause environmental problems, and although polylactic acid (PLA) is a biodegradable alternative with similar properties, it suffers from brittleness, poor impact strength, low heat distortion, and thermal instability. The study investigates whether modified jute fibers can reinforce PLA to enhance adhesion. PLA and cut jute fibers were extruded into biocomposites, with the fibers pretreated by alkaline, maleic anhydride functionalization, or gamma irradiation. The 10 wt % CJF biocomposites irradiated at 50 kGy exhibited enhanced mechanical, thermal, structural, and morphological properties, making them suitable for rigid food packaging and a viable alternative to petroleum‑based thermoplastics.

Abstract

The extensive use of petroleum-based plastics has led to serious environmental problems worldwide. A viable alternative is to replace these polymers with those that are biodegradable. Polylactic acid (PLA) is a biodegradable polymer with properties that are similar to petroleum-based polymers. However, it has some drawbacks such as brittleness, poor impact strength, low heat distortion, and poor difficulties in thermal stability during processing. In this study, we describe the use of modified jute fibres to reinforce the PLA polymer matrix in order to improve its adhesion. Biocomposites of PLA and cut jute fibres (CJF) were prepared by extrusion. The CJF were modified using three different physical and chemical pretreatments (alkaline, maleic anhydride functionalization, and gamma irradiation). The results showed improvement in the mechanical, thermal, structural, and morphological properties of PLA biocomposites with 10% wt. CJF that were subjected to gamma irradiation at 50 kGy. The biocomposites developed could be used for rigid food packaging and are a good alternative for reducing domestic dependence on petroleum-based thermoplastics.

References

19