Biosensors · 2019 · 17 citations · 36 references
Natural SciencesChemistryMaterials ScienceElectrochemistryNanomaterialsNanotechnologyElectrochemical CellsElectrode MaterialsNanomaterial CharacterizationNanoparticle CharacterizationNanoparticle SurfacesNanotubesElectrochemical BehaviorElectrochemical Impedance AnalysisNanomaterial-modified ElectrodesNanoparticlesOpen-circuit PotentialPotential MeasurementTitanium Dioxide NanoparticlesVoltammetry
The goal of this research was to find the best conditions to prepare titanium dioxide nanotubes (TNTs) modified with gold nanoparticles (AuNPs). This paper, for the first time, reports on the influence of the parameters of cyclic voltammetry process (CV) -based AuNP deposition, i.e., the number of cycles and the concentration of gold salt solution,on corrosion resistance and the capacitance of TNTs. Another innovation was to fabricate AuNPs with well-formed spherical geometry and uniform distribution on TNTs. The AuNPs/TNTs were characterized using scanning electron microscopy, X-ray photoelectron spectroscopy, electrochemical impedance spectroscopy, and open-circuit potential measurement. From the obtained results,the correlation between the deposition process parameters, the AuNP diameters,and the electrical conductivity of the TNTs was found in a range from 14.3 ± 1.8 to 182.3 ± 51.7 nm. The size and amount of the AuNPs could be controlled by the number of deposition cycles and the concentration of the gold salt solution.The modification of TNTs using AuNPs facilitated electron transfer, increased the corrosion resistance, and caused better adsorption properties for bovine serum albumin.
36
Probing BSA Binding to Citrate-Coated Gold Nanoparticles and Surfaces
Scott H. Brewer, Wilhelm R. Glomm, Marcus C. Johnson et al. · Langmuir · 2005 · 889 citations
Yonggang Zhang, Lili Ma, Jialin Li et al. · Environmental Science & Technology · 2007 · 240 citations
Engineering, Chemical Engineering, Environmental Engineering +17