AIP conference proceedings · 2019 · 31 citations · 5 references
Natural SciencesMaterials EngineeringMaterials ScienceHeat TransferMaterials CharacterizationMetallic MaterialsHeat ConductionHeat Transfer In SolidsMetalsThermal DiffusivityThermal Expansion AnalysisThermal Properties Of MaterialsDensityReference Material CharacterizationTemperature-dependent ConductivityTemperature-dependent Thermal DiffusivityThermal ConductivityThermal Conductivity MeasurementsThermal Diffusivity MeasurementThermal Expansion
The paper presents the results of measurement thermal diffusivity temperature characteristic of the Titanium Grade 1 (Ti Grade 1, with density 4.34 g/cm3 at RT) in wide temperature range from (-)60 ℃ to (+)1100 ℃. Two kinds of the Netzsch laser flash apparatuses for the measurement of thermal diffusivity and conductivity were used, i.e. the low temperature LFA 467 and the high temperature LFA 427. As a reference material a sample from a stainless steel A310. Reference material was used to verify the test results of thermal diffusivity and to determine the thermal conductivity by the comparative method. The results of the thermal diffusivity tests of the Titanium Grade 1 performed by means of LFA 467 and LFA 427 apparatuses showed to be consistent to each other. In calculation of the thermal diffusivity and thermal conductivity temperature characteristics the influence of thermal expansion of the tested material was taken into account. Tests of temperature characteristics of thermal diffusivity of Ti Grade 1 showed the occurrence of structural change during the first heating at a temperature of about 890 °C. This effect has been confirmed by thermal expansion studies, which were carried out in the range from room temperature (RT) up to 1100 °C using the Netzsch high temperature dilatometer DIL 402.
5
Marcin Wachowski, Tomasz Płociński, Krzysztof J. Kurzydłowski · Journal of Alloys and Compounds · 2016 · 139 citations
Natural Sciences, Materials Engineering, Materials Science +14
Piotr Bazarnik, Bogusława Adamczyk‐Cieślak, A. Gałka et al. · Materials & Design · 2016 · 102 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +16