IEEE Transactions on Geoscience and Remote Sensing · 2019 · 16 citations · 35 references
Natural SciencesOcean EngineeringOceanographyOcean InstrumentationOcean ModelingOcean WavesRadar InstrumentationRadar Signal ProcessingRadar SystemsWave Measurement InstrumentsWave MeasurementsWave SpectraDirection FindingNumerical Wave ModelingSignificant Wave HeightSignificant Wave Height EstimationWave Directional SpreadingWave Height MeasurementWave HeightsWave Model
Ocean wave height measurement using a wide-beam high-frequency surface wave radar (HFSWR) remains challenging due to its poor spatial resolution, which significantly limits the application of such compact systems. In this article, a novel method for wave height field extraction from the first-order Doppler spectra of a dual-frequency wide-beam radar is proposed. A model relating significant wave height to the ratio of the first-order spectral powers associated with two radar frequencies is put forward and studied numerically. Through theoretical analysis and experimental validation, it is confirmed that the first-order Doppler peaks of two radar frequencies have arisen from an approximately same direction of arrival (DOA), and their amplitudes are also affected by a similar wave directional spreading. Hereby, an algorithm combining beamforming and direction finding is developed to determine the spatial distribution of the first-order spectral power ratio and derive the significant wave height field. Finally, experimental results are given to verify the algorithm. The radar-derived wave height field agrees well with that obtained using a numerical wave model. Furthermore, the radar-measured wave heights are compared with the data collected by two buoys at the distances of 12.7 and 73 km, respectively. The comparison shows that the corresponding root-mean-square errors are 0.3 and 0.5 m and the correlation coefficients are 0.85 and 0.88, respectively.
35