Proceedings of the Satellite Division's International Technical Meeting (Online)/Proceedings of the Satellite Division's International Technical Meeting (CD-ROM) · 2019 · 14 citations · 0 references
EngineeringAerospace EngineeringElectrical EngineeringGlobal Navigation Satellite SystemsInstrumentationWireless CommunicationsDigital Signal ProcessingGnss Atmospheric EffectsGnss Reference FramesInterference ManagementDuty Cycle AnalysisGlobal Navigation Satellite Systems (Gnss)Gnss PositioningNoise Equivalent PowerStandardization
In the context of the evaluation of the GNSS L5/E5a interference environment dominated by DME/TACAN and JTIDS/MIDS pulses, RTCA DO-292, 2004 [1] proposes a model to compute the blanker duty cycle and the equivalent noise level contribution of the non-blanked interference; however the corresponding blanker model is not clear. That blanker cannot be a pure envelope detector triggering the blanker by comparing at each epoch the magnitude of the envelope of each individual single interference pulse to a threshold, as it may have been assumed in [1]. Also, for standardization purposes, it is proposed to define a very simple mechanism validating the operation of a GNSS receiver in the L5/E5a environment, also defined as a minimum blanker. In this paper, three simple blanker mechanisms were tested assuming the US hot spot DME/TACAN environment: Instantaneous blanker, Average power and Blank-and-Hold blankers. This study shows that the Instantaneous Blanker is not providing adequate performance, nor the Blank-and-Hold mechanism. It also shows that the Average Power blanker with a window of 0.5 µs allows to obtain performance very similar to that of the analytical model based on the [1] blanking methodology.