Materials Science and Technology · 2019 · 43 citations · 28 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysFracture MechanicsLaser Material ProcessingMetalsPhysical MetallurgyStrengthening MechanismsDendrite Arm SpacingHeatHeat Input ControlLaser Metal DepositionSecondary Dendrite Arm SpacingTensile StrengthThermal Effects In Laser Processing
Thin-walled specimens with more than 150 layers were deposited by laser metal deposition without cracks and concaving deformation. The microstructure in each layer could be divided into three zones according to the morphology. The homogeneity deteriorated with the rising of the input. The tensile strength dropped 29.7% when the porosity increased from 0.53% to 1.88%. Controlling the oxygen under 0.5% and optimising the heat input, the as-built tensile strength reached 360 MPa. The fracture elongation was enhanced from 3.9% to 12.7% when the heat input was increased from 480 to 1200 W. The decrease of the secondary dendrite arm spacing and the change of fracture mechanism is the main reason leading to the strengthening of the mechanical properties.
28
3D printing of high-strength aluminium alloys
John H. Martin, Brennan D. Yahata, Jacob M. Hundley et al. · Nature · 2017 · 2.9K citations
Wei Li, Shuai Li, Jie Liu et al. · Materials Science and Engineering A · 2016 · 851 citations
Natural Sciences, Materials Engineering, Materials Science +13
Mechanical Properties of AlSi10Mg Produced by Selective Laser Melting
Karolien Kempen, Lore Thijs, J. Van Humbeeck et al. · Physics Procedia · 2012 · 830 citations · Full text