International Journal of Geotechnical Engineering · 2019 · 10 citations · 21 references
EngineeringCivil EngineeringFoundation EngineeringGeotechnical EngineeringSoil MechanicsBearing CapacityShaft DesignAxial CapacityAxial Load ResponseExperimental Study DesignLoad Transfer In MicropilesMicropilesTensile DeformationTensile LoadingTensile Strength
Screw micropiles or “ground screws” (diameter less than 200 mm, length less than 5 m) consist of a steel tubular shaft with continuous spiral threads, and a threaded tapered segment; the installation is achieved by rotary driving. Although ground screws are useful in many applications as well as environment-friendly, research on their behaviour is limited. The paper presents an experimental study on the response of screw micropiles subjected to tensile and compressive axial loading. Twenty full-scale load tests were conducted on four types of screws, with diameter 66-114 mm and length 0.8-1.6 m, at a test site in Italy, characterized by the presence of predominantly clayey soils. The micropiles achieved tensile and compressive capacities of 23-60 kN and 20-75 kN respectively, with pile movements in the range 1-9 mm. The results were interpreted in the light of a recently developed method to compute bearing capacity of screw micropiles.
21
Stability of plate anchors in undrained clay
R. S. Merifield, Scott W. Sloan, Hai‐Sui Yu · Géotechnique · 2001 · 270 citations
Performance of helical piles in oil sand
Mohammed Sakr · Canadian Geotechnical Journal · 2009 · 191 citations