Seawater/alkaline liquid cascade‐scrubbing desulfurization performance for the exhaust gas of a 162‐kW marine diesel engine

Min Kuang, Xuehui Hu, Guohua Yang, Jinxin Wang, Guanghui Yuan, Chujiong Tao, Sili Wu, Jieyi Ding, Xinyi Meng

Asia-Pacific Journal of Chemical Engineering · 2019 · 11 citations · 15 references

Concepts

Abstract

Abstract A cascade‐scrubbing technology was developed for marine diesel engines to improve the current once‐through desulfurization solutions. To confirm the seawater/alkaline liquid cascade‐scrubbing advantages of higher efficiencies and lower lye consumption compared with current solutions, desulfurization experiments with different scrubbing models were performed for a 162‐kW marine diesel engine. In the open‐loop model with SO 2 of 1,000–2,860 mg/Nm 3 , desulfurization with the allowed liquid–gas ratios ≤8 L/Nm 3 for the packing tower failed to fully meet the ECA's requirements, despite the efficiency increasing with liquid–gas ratio, seawater alkalinity, and packing height and decreasing with SO 2 concentration. In the closed‐loop solution, to obligate the ECA's requirements with SO 2 of 2,860 mg/Nm 3 , a high liquid–gas ratio of 4.8 L/Nm 3 was necessitated at Na/S=2. In contrast, in the seawater/alkaline liquid cascade‐scrubbing model under high‐sulfur and low‐alkalinity conditions (2,860 mg/Nm 3 and 0.84 mmol/L), the solution utilized 5–6 L/Nm 3 seawater in the main scrubbing section to scrub 80–90% SO 2 and an extremely low alkaline‐liquid dose below 1 L/Nm3 in the auxiliary scrubbing section to remove the residual SO 2 , finally allowing a high efficiency ahead of the open‐loop model and meanwhile cutting down an 80–90% lye consumption compared with the closed‐loop model.

References

15