Characterization of Bio-fiber from <i>Pongamiapinnata L</i>. Bark as Possible Reinforcement of Polymer Composites

M. Umashankaran, S. Gopalakrishnan

Journal of Natural Fibers · 2019 · 20 citations · 34 references

Concepts

Abstract

The suitability of Pongamia pinnata L .bark fiber (PPF) as polymer reinforcement was identified first time in this article. Chemical analysis, X-Ray Diffraction (XRD), and Fourier Transform Infrared Spectroscopy (FTIR) analysis exemplified the presence of cellulose, hemicelluloses, and lignin in PPF. Higher cellulose (62.34 wt.%), crystalline index (45.31%) and low hemicellulose (14.57 wt. %), density (1345 kg/m3), and crystalline size (5.43 nm) of PPF were beneficial for reinforcement. PPF is thermally stable up to 210°C which is acknowledged from the Thermogravimetric and Differential Scanning Calorimeter curves. Surface roughness parameters of PF were identified through the Atomic Force Microscope. Comparatively lower density (1345 kg/m3) and higher tensile Strength (322 Mpa) of PPF have proved that it is an appropriate reinforcement to fabricate the eco-friendly bio-composites.

References

34