MATERIALS TRANSACTIONS · 2019 · 38 citations · 14 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallurgyStructural MaterialsAlloysMetalsMicrostructure AnalysisMicrostructure ControlPowder MetallurgyPowder ProcessingHarmonic StructureMetal MicrostructureMicrostructurePlastic Deformation BehaviorPowder Metallurgy ProcessingSpark Plasma SinteringStrain Hardening BehaviorStrain Hardening Rate
This study aimed at investigating the influence of microstructure on mechanical properties of Harmonic Structured (HS) pure-Ni compacts. The harmonic structure is a heterogeneous microstructure with a spatial distribution of fine grains (FG) and coarse grains (CG), that is, the CG areas (‘Core’) embedded in the matrix of three-dimensionally continuously connected network of FG areas (‘Shell’). The HS pure-Ni samples were fabricated by powder metallurgy route consisting of mechanical milling (MM) of plasma rotated electrode processed pure-Ni powder and subsequent sintering by Spark Plasma Sintering. The plastic deformation at powder particle surface increases with increasing MM time. As a result, after sintering, shell fraction also increases in the HS pure-Ni samples. It was found that the fraction of a “shell” area is an important parameter controlling the balance of the mechanical properties of the HS pure-Ni compacts. The HS pure-Ni with a higher fraction of “shell” area demonstrated higher strength and approximately similar elongation as compared to the homo Ni samples and HS pure-Ni samples containing low shell fraction. Moreover, the effects of strain hardening rates and strain hardening exponents on deformation behaviour of HS pure-Ni samples were also discussed.
14
High tensile ductility in a nanostructured metal
Yinmin Wang, Mingwei Chen, Fenghua Zhou et al. · Nature · 2002 · 2.9K citations
Natural Sciences, Materials Engineering, Materials Science +14