Results in Physics · 2019 · 114 citations · 45 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials ChemistryNanomaterialsSurface ScienceNanotubesOptoelectronic MaterialsPhotovoltaic DevicesPhotovoltaic MaterialsSolar Cell MaterialsSolar CellsAnodic OxidationDye-sensitized Solar CellsFill FactorOptoelectronic PropertiesOxidationPhotoanodesPhotovoltaic EfficiencySurface Properties
In this paper, TiO2 nanotube arrays were prepared by anodic oxidation method. The effects of water content, anodizing time and sample post-treatment on the morphology and crystal structure of TiO2 nanotube arrays were systematically investigated. We explored the performance of dye-sensitized solar cells (DSSCs) based on dye N-719. The TiO2 nanotube arrays prepared under different water content and different anodizing time conditions were used as photoanodes. The results show that DSSC has best photovoltaic performance when the water content is 2 vol%. With the increase of oxidation time, Jsc increases continuously, open voltage (Voc) and fill factor (FF) increase first and then decrease. The best optoelectronic properties obtained that the short circuit current, open circuit voltage, fill factor and photoelectric conversion efficiency as following, Jsc = 5.2 mA/cm2, Voc = 0.7 V, FF = 0.54, η = 1.96% respectively.
45
James R. Jennings, Andrei Ghicov, Laurence M. Peter et al. · Journal of the American Chemical Society · 2008 · 763 citations
Natural Sciences, Materials Engineering, Materials Science +17
Hierarchical TiO<sub>2</sub> Photoanode for Dye-Sensitized Solar Cells
Frédéric Sauvage, Fabio Di Fonzo, Andrea Li Bassi et al. · Nano Letters · 2010 · 341 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17