High‐Pressure Sintering of Rhombohedral Cr<sub>2</sub>S<sub>3</sub> Using Titanium–Zirconium–Molybdenum Tools

Dennis Groeneveld, Hendrik Groß, Anna‐Lena Hansen, Torben Dankwort, Julian Hansen, Jürgen Wöllenstein, Wolfgang Bensch, Lorenz Kienle, Jan König

Advanced Engineering Materials · 2019 · 11 citations · 21 references

DOIFull text

Open access

Concepts

Abstract

The influence of sintering parameters on the physical properties and the chemical structure of rhombohedral Cr 2 S 3 (rh‐Cr 2 S 3 ) is investigated using high pressures and high temperatures. The densification of the powder is performed by applying the high‐pressure field‐assisted sintering technique/spark plasma sintering. Using a titanium–zirconium–molybdenum (TZM) alloy as sintering tool, it is possible to increase the magnitude of the applied pressure to several hundred MPa at temperatures as high as 1223 K. A relative density of up to 99.9% is achieved at a sintering temperature of 1223 K and a pressure of 395 MPa. The presence of phase‐pure rh‐Cr 2 S 3 is proven by X‐ray diffraction analysis and transmission electron microscopy. The Seebeck coefficients of the self‐doped samples change drastically with the sintering temperatures ranging between −650 and −350 μV K −1 . The densities and the thermal conductivities of the sintered samples increase with increasing sintering temperatures. The electrical conductivity is largely increased compared with the thermal conductivity potentially due to the current‐assisted high‐pressure sintering.

References

21