Ironmaking & Steelmaking Processes Products and Applications · 2019 · 19 citations · 21 references
Natural SciencesMaterials EngineeringMaterials ScienceAdditive ManufacturingMechanical Behavior Of MaterialsStructural MaterialsAlloysDuctilityMaterial PerformanceMechanical CharacterizationMetal Additive ManufacturingSteel MaterialsAging Effects On Tensile PropertiesAging StrengtheningMechanical Properties Of SteelsSteel HardnessStrengthening MaterialsTensile StrengthUltimate Strength AnalysisUltimate Tensile Strength
Additively manufactured grade 300 maraging steel (AM300) exhibits high strength but low elongation, because the precipitation strengthening effected by aging treatment has not been fully took effect. This work aims to optimize the aging treatment process of AM300. It was aged at 420°C, 500°C and 550°C for 4 h, respectively. It was found that the aged AM300 exhibited the best combination of strength and ductility (ultimate tensile strength (UTS) was 1740 MPa, total elongation (TE) was 10.2%, hardness was 520.4 HV) at 420°C. As compared to the non-aged AM300 (UTS = 1060 MPa, TE = 4.2%, hardness = 349.2 HV), the UTS, TE and hardness were increased by 64.1%, 142% and 49%, respectively.
21
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
Suihe Jiang, Hui Wang, Yuan Wu et al. · Nature · 2017 · 1.4K citations
High dislocation density–induced large ductility in deformed and partitioned steels
Binbin He, Bin Hu, Hung‐Wei Yen et al. · Science · 2017 · 1.2K citations
Natural Sciences, Materials Engineering, Materials Science +17
Bone-like crack resistance in hierarchical metastable nanolaminate steels
Motomichi Koyama, Zhao Zhang, Meimei Wang et al. · Science · 2017 · 407 citations
Natural Sciences, Materials Engineering, Materials Science +17