Predictive value of intracrystalline interphase point measured by optical low-coherence reflectometry for the estimation of the anatomical position of an intraocular lens after cataract surgery

Abstract

Purpose To investigate the predictive value of the intracrystalline interphase point (ICIP) measured with optical low-coherence reflectometry (OCLR) to estimate the final lens position (FLP) of an intraocular lens (IOL) after cataract surgery. Setting Alcañiz Hospital, Teruel, Spain. Design Single-center retrospective descriptive study. Methods Patients undergoing cataract surgery were enrolled. They were grouped according to the IOL implanted as follows: Group 1, Acrysof IQ aspheric SN60WF IOL (77 eyes); Group 2, enVista MX60 IOL (71 eyes); Group 3, CT Asphina 409 IOL (44 eyes). An OCLR-based biometer (Lenstar LS 900 system) was used for biometric measurements preoperatively and at 4 to 5 weeks postoperatively. Results The study comprised 192 eyes of 174 patients (mean age: 76.4 years). One hundred seventy eyes (88.5%) eyes showed an absolute refractive prediction error (ARPE) less than 0.50 diopters (D). The mean ARPE was 0.25 D ± 0.21 (SD). Significantly higher FLP values were found in Group 2 compared with the other two groups (P < .001). Significantly lower ICIP values were found in the eyes with an ARPE of 0.50 D or more compared with eyes that had an ARPE less than 0.50 D in Group 1 (P = .042) and Group 2 (P = .023). The correlation of the FLP with the ICIP was good in all three groups (r ≥ 0.74, P <.001). Three linear expressions were obtained to predict the FLP from the ICIP and other preoperative data (R2: 0.85, 0.69, and 0.49 in Groups 1, 2, and 3, respectively). Conclusions The position of the ICIP measured with OCLR correlated with the FLP after cataract surgery, and it can be used to optimize IOL power calculations.