Effects of CeO<sub>2</sub> Addition on Slip - Cast Yttria Tetragonal Zirconia Polycrystals Toughened Alumina (ZTA)

Sivakumar Sivanesan, Teow Hsien Loong, Satesh Namasivayam, Mohammad Hosseini Fouladi

Key engineering materials · 2019 · 11 citations · 28 references

DOIFull text

Open access

Concepts

Abstract

Addition of CeO 2 into ZTA and its effects on microstructure and mechanical properties were investigated. CeO 2 was detected with significant amounts only above 10 wt%. Viscosity was measured for slurry preparartions and characterization of mechanical properties of ZTA. Additions of CeO 2 of more than 10 wt% surpassed the solubility limit and formed Ce 2 Zr 3 O 10. Ce 2 Zr 3 O 10 increased the tetragonality factor, prevented excessive grain growth through a pinning effect, which is attributed to the segregation of Ce 2 Zr 3 O 10 to the grain boundaries and showed a peak in fracture toughness with a value of 9.3 MPam 1/2 with 10 wt% additions of CeO 2 . Further additions of CeO 2 reduced ZTA’s mechanical strength. Maximum value of H v was 17700 MPa with 10 wt% CeO 2 . Porosities have been attributed as the underlying reason as to why theoretical density were always higher than measured densities.

References

28