Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · 2019 · 33 citations · 24 references
Natural SciencesMaterials EngineeringMaterials ScienceNanomaterialsPolymer ChemistryPolymer MaterialsComposite MaterialsGear DesignNanocompositesPolymer NanocompositesWear ResistanceWear-resistant MaterialsCohesive FailureDuctile FailureGear MaterialsGear WearHeat ResistanceMechanical Properties Of NanocompositesPolyoxymethyleneTwin-screw Extrusion
Nanocomposite gears and standard mechanical testing specimens based on polyoxymethylene containing different fractions (0, 3, 6, and 9 wt%) of nanosized precipitated calcium carbonate particles were produced by using twin-screw extruder and injection molding machine. The wear and temperature of gears teeth were measured by a gear test rig. The morphologies of fractured gears teeth were analyzed by using scanning electron microscopy. Results of experiments indicate that the incorporation of CaCO 3 nanoparticles into polyoxymethylene increases the flexural and heat resistance and reduces the magnitudes of wear and temperature of gears noticeably. The maximum flexural resistance is achieved by employing 3 wt% of CaCO 3 nanoparticles. Gears containing 3 wt% of CaCO 3 nanoparticles present the lowest wear rate, which is 61% smaller than that of neat polyoxymethylene gear. The life time (durability till failure) of nanocomposite gear was twofold as compared to neat polyoxymethylene gear. The nanocomposite gear showed abrasive-wear and brittle-fracture, yet the neat polyoxymethylene gear demonstrated prevailing cohesive wear and ductile failure.
24
State-of-the-art of polymer tribology
S.W. Zhang · Tribology International · 1998 · 223 citations
Natural Sciences, Materials Engineering, Materials Science +12