Journal of Breath Research · 2019 · 19 citations · 42 references
EngineeringBioengineeringBiomedical EngineeringBiosensorsNanomaterialsSensorsChemical SensorsGas SensorsNanomaterial-based BiosensorsNanosensorsSensor-based AnalysisCarbon Nanotube Gas SensorsCarbon Nanotube Sensor MaterialsCarbon Nanotube SensorsGas SensingHybrid SensorsNanomaterial-based SensorsNanostructured Gas SensorsSelectivity
Abstract This work demonstrates the development of Ag@polyaniline/multi-walled carbon nanotube nanocomposite-based sensor strips and a suitable integrated electronic read-out system for the measurement of trace-level concentrations of ammonia (NH 3 ). The sensor is optimized under various operating conditions and the resulting sensor exhibited an enhanced response (32% for 2 ppm) with excellent selectivity. Stable performance was observed towards NH 3 in the presence of high concentrations of CO 2 (>40 000 ppm), simulated and real breath samples. A suitable electronic sensor read-out system has also been designed and developed based on multi-scale resistance-to-voltage conversion architecture, processed by a 32-bit microcontroller which is operatable over a wide range of sensor resistance (1 kΩ to 200 MΩ). As a proof of concept, integration of gas-sensing strips with the electronic read-out system was tested with various levels of NH 3 (<2 ppm as normal, >2 ppm as critical and 2 ppm as threshold), which is important for clinical breath analyzer applications. The developed prototype device can be readily incorporated into a portable, low-cost and non-invasive point-of-care breath NH 3 detection unit for portable pre-diagnostic breath analyzer applications.
42
Helical microtubules of graphitic carbon
Sumio Iijima · Nature · 1991 · 42.8K citations
Seon‐Jin Choi, Bong-Hoon Jang, Seo-Jin Lee et al. · ACS Applied Materials & Interfaces · 2014 · 394 citations
Sukhananazerin Abdulla, Thalakkotur Lazar Mathew, Biji Pullithadathil · Sensors and Actuators B Chemical · 2015 · 392 citations