Japanese Journal of Applied Physics · 1998 · 48 citations · 3 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsMaterials ChemistryCeramic Firing TechniquesCeramic ProcessingDielectric CeramicsFiring ProcessesPiezoelectric CeramicsSinteringBarium Titanate CeramicsCeramic SynthesisCurie Temperature DeterminationDielectric ConstantGrain Orientation AnalysisReduction RatioSintering Behavior
The purpose of this paper is to investigate the preparation and properties of SrBi 2 Ta 2 O 9 ceramics as capacitors and/or piezoelectric materials. Ordinarily fired (OF) samples were prepared by a conventional ceramic technique. Grain-oriented (GO) samples were prepared by the hot-forging method. High-density OF samples with density ratios of 95–96% to theoretical X-ray density were easily obtained at the optimized sintering temperature (1230°C). In this OF sample, the Curie temperature existed at 322°C, and the dielectric constant at room temperature was 135. SrBi 2 Ta 2 O 9 ceramics did not deform smoothly at 1230–1250°C, and the maximum reduction ratio was about 0.7. The X-ray grain orientation factor of the GO sample was about 0.52. The coupling factor k 33 of the GO sample with f of 0.36 was 17.7%.
3
Fatigue-free ferroelectric capacitors with platinum electrodes
C. A-Paz de Araujo, J. D. Cuchiaro, L. D. McMillan et al. · Nature · 1995 · 2.6K citations
Natural Sciences, Materials Engineering, Materials Science +14
Crystal structure of (Sr, Ba)Bi2Ta2O9
Robert E. Newnham, Raymond Wolfe, R.S. Horsey et al. · Materials Research Bulletin · 1973 · 160 citations