High Temperature Applicable Separator by Using Polyimide aerogel/polyethylene Double-Layer Composite Membrane for High-Safety Lithium Ion Battery

Gunhwi Kim, Jin‐Young Kim, Jongyeob Jeong, Daero Lee, Myeongsoo Kim, Sangrae Lee, Seohyun Kim, Hyunju Lee, Haksoo Han

International Journal of Electrochemical Science · 2019 · 18 citations · 37 references

DOIFull text

Open access

Concepts

Abstract

To address the vulnerability of a conventional separator to high temperature, a new double-layer function of separator with a double-layer function is suggested for high-safety lithium-ion batteries that are used in harsh condition. The new composite separator was fabricated by coating thermally imidized polyimide aerogel (PIA) on a porous polyethylene (PE) membrane, with polyvinylidene fluoride (PVDF) as a binder, to improve the thermal stability of the separator. The PIA/PE double-layer composite performed very well, especially in terms of thermal stability. The newly suggested separator showed a near-zero thermal shrinkage rate compared to commercial PE separators, which are defective in having high levels of the same, and retained its structure up to 140 °C. The PIA supporting layer showed hardly any change after heat treatment, and the PE layer performed its role as a shut-down layer perfectly, ensuring the safety of the new separator. These results prove that a PIA/PE separator can prevent batteries from exploding and overcharging. In addition, the PIA/PE separator also demonstrated excellent electrolyte uptake and electrolyte wettability to electrolyte. PIA/PE separator based coin cells exhibited outstanding cycling and rate performances, especially at high current rates, compared to coin cells with a standard PE separator. Therefore, the new PIA/PE separator is an ideal candidate for use in high-safety lithium-ion batteries at high temperatures, based on its excellent thermal and chemical stability.

References

37