Materials & Design · 2019 · 62 citations · 48 references
EngineeringCivil EngineeringMaterials EngineeringBuilding MaterialsGeotechnical EngineeringSustainable Building DesignCementitious MaterialsConcrete ConstructionConcrete MaterialsConcrete TechnologyWater ContentCompressive StrengthDry DensityFoam DensityFoamingGreen CementHigh-performance Cementitious MaterialsSpecific StrengthWater Absorption
Green high-belite sulphoaluminate cement (GHSC) was firstly calcined by whole industrial wastes. Foam and GHSC-based foamed concrete (GHSFC) were subsequently investigated by orthogonal test with three types of foaming agents (plant protein PPF, animal protein APF, and polymer compound PCF), dilution ratios and valve angles of foaming machine suction (α). The foam density (ρF), foam multiple (βF), 1 h settling distance (SD) and 1 h bleeding volume (BV) of preformed foam and the dry density (ρd), compressive strength (fcu), specific strength (fSS), thermal conductivity (kc), porosity (ε) and volumetric water absorption rate (γV) of cured GHSFC were correspondingly characterized along with microstructures and crystalline structures. The cost-effective GHSC is successfully sintered with waste desulfurized petroleum coke, mine tailings, bauxite and carbide slag with a mass ratio of 1.65:1:0.4:2.5, which possesses close minerals and cured strength to HSC through microstructure, crystallinity, and mechanical property verification. Orthogonal range and variance analysis reveal that, the PPF is the most suitable foaming agent with a dilution ratio of 1:30 and a of 60° to produce GHSFC-based prefabricated thermal insulation panels with optimal performances of ρd, fcu, fSS, kc, ε and γV being 295 kg/m3, 0.53 MPa, 1796.6 N·m/kg, 0.0785 W/m·k, 85.8% and 55.2%, respectively.
48
IOP Conf. Ser.: Mater. Sci. Eng. 117 012045
Menghuai Wu, Alexander Vakhrushev, Andreas Ludwig et al. · 2016 · 5K citations
Natural Sciences, Materials Engineering, Materials Science +7