Materials Research Innovations · 2019 · 47 citations · 14 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsTribologyAlloysComposite MaterialsMechanical CharacterizationMechanical PropertiesTribological MaterialsWear-resistant MaterialsAbrasive Wear ResistanceAluminium AlloysAluminum AlloysComposite Tribological MaterialsHardnessHybrid CompositesStir CastingTensile Strength
Aluminium (Al6061) with Graphite (Gr) and Titanium Carbide (TiC) particles of different configurations have been prepared using stir casting method. The development of aluminium with Gr and TiC composites has been confirmed with Energy Dispersive Spectrometer (EDS) tests. Scanning Electron Microscope (SEM) study has been performed to identify the configuration of the composite material. In the current work, an attempt is made to study the mechanical and tribological behaviour of Al6061 reinforced with 5wt% Gr for different fraction of TiC hybrid composites. The addition of Gr was maintained constant and equal to 5 wt.% throughout the experiment. TiC was varied from 0% to 8 wt. % in a step of 2%. The effect of addition of Gr and TiC on microstructure, micro hardness, tensile strength, wear resistance were investigated. The results showed that aluminium reinforced with Gr and TiC exhibited better mechanical and tribological properties of composites.
14
Kazi Md. Shorowordi, Tahar Laoui, A.S.M.A. Haseeb et al. · Journal of Materials Processing Technology · 2003 · 683 citations
Natural Sciences, Materials Engineering, Materials Science +16