Environmental Technology · 2019 · 20 citations · 19 references
EngineeringChemical EngineeringFood ScienceMembrane ScienceWastewater TreatmentWater TreatmentMembrane FabricationMembrane FiltrationMembrane FoulingMembrane MaterialsMembrane SeparationPolymeric MembranesFoulingGrapheneGraphene OxideGraphene Oxide MembranesMembrane Surface ModificationMicrofiltrationMicrofiltration MembranesNanoparticles
A modified microfiltration (MF) membrane was prepared by flow-through coating method. First the sulfuric acid solution was vacuum filtered on the polyethersulfone (PES) MF membrane, providing the introduction of a sulfonic acid group to the backbone of PES. Sequentially, the polyethyleneimine solution was vacuum filtered to provide amine groups on the membrane surface. Finally, the graphene oxide solution, functionalized with different masses of tannic acid, was vacuum filtered on the membrane surface, producing the cross-linked modified membranes. These were efficient in the removal of anionic food colouring, achieving high removal rates and low fouling, compared to unmodified membrane. The best membrane in terms of bright blue dye removal was the MF PEI5GO1TA4, capable of removing all the feed solution, and demonstrating its possibility of reuse in five cycles of operation.
19
K. Kadirvelu, M.R. Kavipriya, C Karthika et al. · Bioresource Technology · 2002 · 775 citations
Engineering, Chemical Engineering, Environmental Engineering +17
Min-Young Lim, Yong‐Seok Choi, Jin‐Seok Kim et al. · Journal of Membrane Science · 2016 · 255 citations