Metals · 2019 · 67 citations · 10 references
EngineeringMaterials EngineeringMaterials ScienceAdditive ManufacturingManufacturing ProcessesMetallic MaterialsAlloysMetal Additive ManufacturingMetal FabricationMetallic StructuresSteel MaterialsSteel StructuresHigh-strength Steel AlloysMetal Impact ToughnessMulti-pass WeldingProcess ParametersProcess Parameters OptimizationTensile StrengthTensile Strength TestingTensile Testing
This work investigates the feasibility of manufacturing a near net shape structural part directly on a subassembly for application in crane construction without post-machining. Single- and multi-pass welding experiments, using the Cold Metal Transfer process (CMT), were executed to identify and verify suitable process parameters. The obtained parameters were then used to manufacture a wall structure and an optical measurement of the resulting geometry was performed. Mechanical properties of the all-weld metal in the as-built condition in different directions were determined. The results for tensile testing showed similar values to the filler material specifications and fracture toughness matched literature values, but a decrease of impact toughness was obtained. Although mechanical testing showed no significant anisotropy, hardness measurements showed the influence of the local temperature profile. Finally, strategies to manufacture a complex structural part were investigated. It was possible to establish a stable process to manufacture a section of the specified geometry in a first attempt. However, results indicate that there is still further work necessary to optimize this process and to investigate the influences on the mechanical properties of the final component.
10
Wire + Arc Additive Manufacturing
Stewart Williams, Filomeno Martina, Adrian Addison et al. · Materials Science and Technology · 2015 · 1.8K citations · Full text
Engineering, Manufacturing Engineering, Materials Engineering +17
Hybrid additive and subtractive machine tools – Research and industrial developments
Joseph M. Flynn, Alborz Shokrani, Stephen T. Newman et al. · International Journal of Machine Tools and Manufacture · 2015 · 450 citations · Full text
Engineering, Industrial Engineering, Manufacturing Engineering +14