Journal of Thermoplastic Composite Materials · 2019 · 32 citations · 31 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer EngineeringPolymer MaterialsTribologyComposite MaterialsFiber-reinforced CompositesMaterial PropertiesMechanical CharacterizationStrength Of MaterialsTribological MaterialsBasalt Fiber ReinforcementFiber-matrix InteractionFiber-reinforced PolymersFibersImpact StrengthInjection Molding TechniqueMelt BlendingTwin-screw Extrusion
The aim of this study is to improve the physical, mechanical, and tribological properties of nylon 6 and polypropylene by reinforcing short basalt fibers (SBFs) of different weight percentages (2.5 and 5 wt%) using melt blending in a twin-screw extruder, followed by injection molding process. The control specimens without reinforcements were also prepared to compare and investigate the influence of fiber content on the properties. Density, tensile, flexural, hardness, impact strength, and tribological characterizations were performed according to ASTM standard. The results show that 5-wt% SBF-reinforced nylon composites exhibit maximum improvement in tensile, flexural, impact, hardness, and specific wear rate. Wear mechanisms were also identified using field-emission scanning electron microscope by examining the surface morphology before and after wear. The observation reveals aligned, undamaged fibers during shear mixing and injection molding. The adhesion between fiber/nylon matrix and stepped fracture in the matrix is also spotted.
31
ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS,
Gergely Czél, Julie A Etches, Ian P Bond et al. · 2012 · 125 citations
Natural Sciences, Materials Engineering, Materials Science +12