Materials & Design · 2019 · 80 citations · 72 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysCladding MaterialsCoating TechnologyCoatingsMetalsSinteringDense MicrostructureFace-centered Cubic LatticeFace-centered Cubic StructureHigh-entropy AlloysMetallurgical BondingMicrostructurePrecipitatesSpark Plasma Sintering
An increasing number of recent studies have indicated that the best balance of mechanical properties of a high-entropy alloy (HEA) needed to meet the requirements of practical structural applications require to produce second precipitates in an HEA matrix. This type of alloy is more appropriately classified as a complex concentrated alloy (CCA) rather than an HEA. Here, we report a simple strategy for the fabrication of CCA coatings with high mechanical properties. In this strategy, the face-centred cubic (FCC)-based Co25Cr25Cu12.5Ni25Al12.5 (at.%) system was chosen, and spark plasma sintering was first used to prepare the Co25Cr25Cu12.5Ni25Al12.5 CCA clad layer directly on a Q235 substrate from simple mixed powders. Our results show that the CCA coating was fabricated successfully on the substrate and that the clad layer exhibited a dense microstructure, a low dilution ratio and good metallurgical bonding with the substrate. A high density of hierarchical intragranular nanoprecipitates was contained in the clad layer. Precipitation strengthening, as one of the main strengthening mechanisms, contributes to a microhardness value of 455 HV for the clad layer, which is much higher than those of most reported FCC-structured HEAs, even some BCC-structured refractory HEAs and several BCC-based HEAs with high Al contents.
72
W. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 26.6K citations
Natural Sciences, Materials Engineering, Materials Science +16
Microstructures and properties of high-entropy alloys
Yong Zhang, Ting Ting Zuo, Zhi Tang et al. · Progress in Materials Science · 2013 · 7K citations
Natural Sciences, Materials Engineering, Materials Science +12
A fracture-resistant high-entropy alloy for cryogenic applications
Bernd Gludovatz, Anton Hohenwarter, D. Catoor et al. · Science · 2014 · 5.6K citations
Natural Sciences, Materials Engineering, Materials Science +12