Metals · 2019 · 13 citations · 15 references
EngineeringMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysCementitious MaterialsSteel MaterialsAuto-temperingCementite PrecipitationHardnessLow-carbon SteelMartensite GrowthMartensitic MicrostructureMartensitic SteelsPrecipitates
The effect of hot-mounting for metallographic studies of as-quenched low-carbon martensitic steels has been studied. Hot-mounting is typically carried out at 150–200 °C, i.e., a low-temperature tempering regime. Cold- and hot-mounted specimens from an as-quenched low-carbon auto-tempered steel were examined using a scanning electron microscope and their hardness levels were also compared. It was found that hot-mounting causes additional tempering that manifests as the appearance of new precipitates in those regions that are free of auto-tempered cementite. The observations were rationalized using DICTRA simulations to calculate the potential growth of cementite. Hot-mounting was also shown to cause a small but statistically significant increase in the hardness of the martensite.
15
Thermo-Calc & DICTRA, computational tools for materials science
J. Y. Andersson, Thomas Helander, Lars Höglund et al. · Calphad · 2002 · 4.2K citations
Natural Sciences, Materials Engineering, Materials Science +13
Carbon partitioning into austenite after martensite transformation
John G. Speer, David K. Matlock, Bruno C. De Cooman et al. · Acta Materialia · 2003 · 1.6K citations
Natural Sciences, Materials Engineering, Materials Science +12
Crystallographic features of lath martensite in low-carbon steel
Hiromoto Kitahara, Rintaro Ueji, Nobuhiro Tsuji et al. · Acta Materialia · 2006 · 981 citations