Materials Research Express · 2019 · 29 citations · 29 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsTribologyAlloysComposite MaterialsMetal MaterialsPhysical MetallurgyTribological MaterialsWear-resistant MaterialsDry SlidingElevated-temperature Material PropertiesFrictionFriction BehaviorHigh-temperature Tribological MaterialsMicrostructural CharacterizationNanoscale TribologyStir Casting
The present study evaluates the tribological behavior of Mg-WC nano-composites at elevated temperature. Mg-WC nano-composites with varying wt% of WC (0.5%, 1%, 1.5% and 2%) have been prepared using ultrasonic vibration assisted stir casting method. Characterizations of composites are performed with the help of optical microscopy, scanning electron microscopy and energy dispersive x-ray patterns. Characterization results confirm the presence of reinforcement phase and microstructural integrity of composites. Micro-hardness and density of composites and base alloy are studied. Effects of operating temperature, applied load and sliding distance on wear and friction characteristics of composites are examined in a high temperature tribotester under dry sliding conditions. Operating temperature is varied over a range of 50 °C to 250 °C while applied load is varied from 20 N to 40 N. Micro-hardness results confirm the improvement in mechanical properties of composites in presence of WC reinforcement. Wear and friction behavior of magnesium alloy gets substantially enhanced with WC nano-particles being incorporated as reinforcement. With incorporation of 2 wt% of WC, wear rate and coefficient of friction of magnesium alloy gets reduced by about 75% and 15% respectively at 20 N and 200 °C. Effects of thermal softening in composites get negated by the presence of harder ceramic phase through formation of some hardened layer at the contact regime.
29
Contact and Rubbing of Flat Surfaces
J. F. Archard · Journal of Applied Physics · 1953 · 7.7K citations