2019 · 17 citations · 6 references
EngineeringDesignElectrical EngineeringDesign OptimizationMicrowave EngineeringSimulation-based DesignLayout OptimizationMicrostrip CircuitsMicrowave Integrated CircuitsMicrowave Transmission LinesTopology OptimizationWaveguidesBandwidthFlange TechnologyMicrostrip LinesPlanar Microwave CircuitsRectangular WaveguidesSubstrate Integrated CircuitsSubstrate Integrated WaveguidesTransition Design
This paper presents a topology optimization approach to design planar transitions between a microstrip line (MSL) and a rectangular waveguide (RWG) in the K-band. The transition comprises two sub-transitions: one from the MSL to a substrate integrated waveguide (SIW) and the second from the SIW to the RWG. Both are on the same substrate and can be manufactured with a standard printed circuit board process. This leads to a very cost-effective solution compared with other approaches. A WR-42 waveguide can easily be surface mounted to the transitions using a standard flange. The transitions have been fabricated, and their measured performance shows good agreement with the simulations. The MSL-SIW transition has a broadband behavior and the SIW-RWG transition still reaches a relative bandwidth of 10%.
6
Radar-Based High-Accuracy Angle Measurement Sensor Operating in the K-Band
Serdal Ayhan, Steffen Scherr, P. Pahl et al. · IEEE Sensors Journal · 2014 · 15 citations