Research on Vector Control Strategy of Surface-mounted Permanent Magnet Synchronous Machine Drive System with High-Resistance Connection

Abstract

High-resistance connection (HRC) is a common electrical fault for the electric machine drive system. This fault can lead to the increased power loss and heat, thus possibly causing the damage of the electric machine drive system due to the excessive temperature. Hence, this paper first proposes a vector control strategy of the surface-mounted permanent magnet synchronous machine (PMSM) drive system with the HRC fault to minimize the copper loss. The mathematical model of the PMSM with the HRC is presented in <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">abc</i> stationary frame. The function relationship between the copper loss and the direct axis current, quadrature axis current, stator resistance, and the additional resistance due to the HRC is established and analyzed. The expression of the direct axis current, which minimizes the copper loss, is deduced under the condition of the HRC in one phase and two phases. Consequently, the proposed vector control strategy for the surface-mounted PMSM driving system is achieved. Both the simulation and experimental results show that the proposed method not only preserves the performance of the conventional vector control method, but also can effectively reduce the copper loss, thus protecting the PMSM from the damage due to the increased temperature possibly caused by the HRC fault.