Journal of Materiomics · 2019 · 26 citations · 22 references
EngineeringMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsMaterials ProcessingAlloysCrystallization ProcessesGrain Structure FormationMicrostructure ControlMicrostructure EvolutionSinteringAnisotropic Grain GrowthAnisotropic GrowthLiquid-phase SinteringMicrostructurePhase Fraction EvolutionPressure-assisted SinteringSintering BehaviorSintering Reactions
Phase relation and microstructure evolution in the pressure-less sintered TiB2‒TiC ceramics preceded with mechanical alloying were systematically studied by a combination of SEM analysis. WC debris from milling balls promotes sintering by dissolving into the TiC phase to achieve dense microstructures at 1600 °C. Variation of W solution in TiC grains exposes two types of core‒rim structures, with no or more W in dark and white cores respectively but with common medium W in both rims. Diminishing white-cores reveal an exchange reaction between WC and TiC via mechanical alloying to form the Ti1-zWzC phase prior to sintering. The dark-cores inherit from the as-milled TiC power to further enable the reprecipitation of rims from a mixed liquid-phase, which facilitated also the anisotropic growth of TiB2 grains. The dark-cores grow persistently in the second-step at 2000 °C enabled by this liquid-phase, which coarsens the TiB2 grains too. With more alloyed phase, sintering was insufficient at 1500 °C with only the surface fluidity from the primary powders, and the second-step sintering increased the fluidity in the liquid-phase to fully densify the binary microstructure. Re-distribution of the alloyed W by two-step sintering rationalizes the evolution process of the binary microstructures and leads to better understanding of the mechanical behaviors.
22
Reaction synthesis of TiB2–TiC composites with enhanced toughness
Guangwu Wen, S.B. Li, B.S. Zhang et al. · Acta Materialia · 2001 · 212 citations
Natural Sciences, Materials Engineering, Materials Science +13